物品名称 规格型号 数量 单位 描述
| 防尘圈 | 见技术参数 | 6.00 | 个 | {"规格型号":"J280","内径":"Φ280mm","密封圈高度":"0","材质":"聚氨酯","使用寿命":"＞6个月"} |
| 耐碱胶条 | 见技术参数 | 150.00 | 米 | {"规格型号":"Φ10","直径":"10mm","上宽度":"0mm","下宽度":"0mm","高度":"0mm","材质":"**乙丙橡胶","工作温度":"≥100℃℃","工作介质":"水、油","使用寿命":"≥90天","特殊要求":"耐碱度≥180g/L","参照标准":"GB/T 3672.1-2002","备注":"1、要求：表面光滑无凹坑、无飞边、耐油、耐高温、耐酸碱、密封性能好\n2、不合格品处理标准：当验收不符合技术要求时，供货商必须更换合格产品"} |
| 耐碱胶条 | 见技术参数 | 50.00 | 米 | {"规格型号":"Φ5","直径":"5mm","上宽度":"0mm","下宽度":"0mm","高度":"0mm","材质":"**乙丙橡胶","工作温度":"130±10℃","工作介质":"铝酸钠溶液、液碱、水","使用寿命":"≥150天","特殊要求":"耐酸碱、耐高温","参照标准":"GB/T 3672.1-2002","备注":"到货验收：\n1、到货时如材质优于本技术要求，质量验收人可予以收货。\n2、耐碱胶条不符合要求，供货厂家免费换货。"} |
| 耐碱胶条 | 见技术参数 | 200.00 | 米 | {"规格型号":"Φ8","直径":"8mm","上宽度":"0","下宽度":"0","高度":"0","材质":"**乙丙橡胶","工作温度":"≥100℃℃","使用寿命":"3个月","特殊要求":"耐酸碱、耐高温","参照标准":"GB/T3672.1-2002"} |
| 骨架油封 | 见技术参数 | 17.00 | 个 | {"规格型号":"140*170*16","内径":"Φ140mm","外径":"Φ170mm","高度":"16mm","骨架材质":"低碳钢","密封材质":"丁腈橡胶","结构形式":"TC型（带副唇内包骨架型）","工作温度":"80℃","使用寿命":"180天","参照标准":"GB/T 9877-2008","备注":"到货验收:包装完好无破损,规格参数符合技术要求,到货提供产品合格证,若到货不满足要求,必须退换货处理,产生费用由供货商自行承担."} |
| 骨架油封 | 见技术参数 | 6.00 | 个 | {"规格型号":"45*65*12","内径":"45mm","外径":"Φ65mm","高度":"12mm","骨架材质":"低碳钢","密封材质":"丁腈橡胶双唇油封","结构形式":"双唇油封，并在唇部装有箍圈式连接的弹簧"} |
| 叮晴橡胶板 | 见技术参数 | 450.00 | 千克 | {"规格型号":"3mm","厚度":"3mm","宽度":"1000mm","材质":"丁腈橡胶（NBR）","参照标准":"GB/T 5574-2008"} |
| 泵进出口垫及泵体密封圈 | 见技术参数 | 3.00 | 套 | {"规格型号":"150E-AH","材质":"**乙丙"} |
| GR型梅花垫 | 见技术参数 | 10.00 | 个 | {"规格型号":"GR48","外径":"104mm","内孔直径":"51mm","厚度":"25.5mm","瓣数":"8","材质":"聚氨酯","使用寿命":"180天"} |
| 梅花垫 | 见技术参数 | 8.00 | 个 | {"规格型号":"Φ51*105*22","外径":"105mm","内孔直径":"51mm","厚度":"22mm","材质":"聚氨酯","使用寿命":"≥90天"} |
| 钢丝编织高压风管 | 见技术参数 | 300.00 | 米 | {"型号":"DN19","材质":"胶管：黑色、耐油的丁晴橡胶(NBR)；增强层：两层高强度的钢丝编织而成；外表层：耐磨损，耐老化的合成橡胶；橡胶管表面：布纹面","内径":"Φ19mm","外径":"Φ32mm","高度":"32mm","颜色":"黑色","使用介质":"压缩空气","工作压力":"18Mpa","参照标准":"GB/T 3683-2011","备注":"使用寿命2个月"} |
| 卡套式高压风管 | 见技术参数 | 1800.00 | 根 | {"型号":"M20*1.5*1000","材质":"橡胶","内径":"Φ18mm","外径":"Φ20mm","高度":"0","参照标准":"JB/T 8727-2017"} |
| 减震胶圈 | 见技术参数 | 500.00 | 个 | {"内径":"30mm","外径":"56mm","厚度":"13mm","材质":"聚氨酯","使用寿命":"6个月","参照标准":"GB/T5272-2017"} |
| 缓冲垫 | 见技术参数 | 100.00 | 个 | {"内径":"14mm","外径":"27mm","厚度":"8mm","材质":"聚氨酯","使用寿命":"＞6个月","参照标准":"HG/T 4237-2011"} |
| 弹性胶圈 | 见技术参数 | 800.00 | 个 | {"内径":"24mm","外径":"45mm","厚度":"12mm","材质":"聚氨酯","参照标准":"GB/T5272-2017"} |
| 缓冲垫 | 见技术参数 | 200.00 | 个 | {"内径":"Φ14mm","外径":"Φ27mm","厚度":"4mm","材质":"聚氨酯","使用寿命":"不小于180天","参照标准":"GB/T 14837.2-2014","备注":"1、产品外观完好、无破损、厚度均匀，边缘光滑；\n2、如与技术要求不符，执行退换货处理，所产生的费用由供应商承担。"} |
| 减震圈 | 见技术参数 | 900.00 | 个 | {"内径":"Φ24mm","外径":"Φ45mm","厚度":"12mm","材质":"聚氨酯","使用寿命":"180天","参照标准":"HG/T 5328-2018","备注":"到货如与技术要求不符,由供应商无条件的给予更换退货."} |
| 高温橡胶软接头 | 见技术参数 | 1.00 | 个 | {"规格":"DN500-10","类型":"内置骨架","公称直径":"500mm","连接形式":"法兰连接","材质":"采用浸胶尼龙帘子布内外面采用高强度耐老化极性橡胶材料，丁晴橡胶；法兰材质：Q235B","工作压力":"1.0MPa","工作温度":"0-100℃","介质":"水","法兰尺寸":"670mm","使用寿命":"365天","参照标准":"GB/T 26121-2010","备注":"1、两端带Q235B法兰；2、与此技术要求不符厂家免费退换货。"} |
| 氟橡胶垫片 | 见技术参数 | 1.00 | 张 | {"规格型号":"1.5m*10m*5mm","长度":"10000mm","材质":"氟橡胶"} |
| 叶滤机颈圈 | 见技术参数 | 1440.00 | 个 | {"宽度":"73mm","厚度":"13mm","材质":"**乙丙","适用温度":"≥110℃","使用寿命":"≥180天","特殊要求":"内径52；外径73；厚度13"} |
| 胶管总成 | 见技术参数 | 5.00 | 根 | {"型号":"M19*1.75*700/2MPa","材质":"胶管为五层棉线编织胶管，丁腈橡胶，接头材质为碳钢","内径":"Φ13±0.5mmmm","外径":"Φ22±0.5mmmm","高度":"700mm","颜色":"黑色","使用介质":"水","工作压力":"0-2Mpa","参照标准":"JB/T 6145-2024","备注":"内径：13mm±0.5mm，外径：22mm±0.5mm，总长度：700mm±5mm。接头：两头直头C型扩口压扣活接头，内丝螺纹，连接内螺纹内径M19螺距1.75(公制)。国产/进口：国产，使用寿命：1年，所属设备名称：阴极预热装置，设备生产厂家：****点击查看，适应温度：-40℃-100℃，参照标准：JB/T 6145-2024，验收标准：到货不合格供应商必须无条件退货或换货处理，所产生费用由供货方承担。"} |
| 胶管总成 | 见技术参数 | 5.00 | 根 | {"型号":"M19*1.75*1500/2MPa","材质":"胶管为五层棉线编织胶管，丁腈橡胶，接头材质为碳钢","内径":"Φ13±0.5mmmm","外径":"Φ22±0.5mmmm","高度":"1500mm","颜色":"黑色","使用介质":"水","工作压力":"2Mpa","参照标准":"JB/T 6145-2024","备注":"内径：13mm±0.5mm，外径：22mm±0.5mm，总长度：1500mm±5mm。接头：两头直头C型扩口压扣活接头，内丝螺纹，连接内螺纹内径M19螺距1.75(公制)。国产/进口：国产，使用寿命：1年，所属设备名称：阴极预热装置，设备生产厂家：****点击查看，适应温度：-40℃-100℃，参照标准：JB/T 6145-2024，验收标准：到货不合格供应商必须无条件退货或换货处理，所产生费用由供货方承担。"} |
联系人9个
可引荐人脉561人
历史招中标信息327条
